Wednesday, October 20, 2010

Flash Audio Processing Assistant (2)


Software from top to bottom was divided into four main parts, the top "wave selection" to choose to handle wav files and the preservation of processed file path, "media play" part of it is a small, wav sound files Play device, you can play above the control buttons on the control of broadcast wav files, but also through the "Graph" button to view the wav file of the sound waveform, "jump to position" you can jump directly to the location you specify to play, the following "sample selector" section is used to set up your wav files to be intercepted the start and end position, the middle part is the last to the output of the new wav file, the bottom four buttons are "starting interception," "re- loading wav file "," on "and" release ", let's look at how to use a wav file Wave Splitter interception.

First, select the "wave selection" part of "Wav fileto split" button on the right, pop up a "Open" dialog box, we'll select a wav file to be intercepted (Fig. 13), after selecting OK, the main interface will show this



Figure 13 Open File dialog box

wav file of the relevant information, such as the length of time wav file will appear in the "sample selection" section, as shown in Figure 14, the file length of 980ms (milliseconds), and then need to "wave selection" part of the "save split



Figure 14 has been open file information

file as "text box will be intercepted to save the wav file path, but also set up we have to intercept the time period, where we set the" start at "(starting position) is 100," end at "(end position) 500 (Figure 15)



Figure 15 Set to save the file and interception range

After all set, we can point at the bottom of the "GO" button to start the intercept, and point the button then, do not see any response, do not worry, the resulting wav file has been saved to your path set to go, that is, simple as that.

Companion of the four; MP3Trim

MP3Trim MP3 is a compact and convenient tool for finishing and interception can be MP3 files that you do not want to part (from the head start or start from the tail) removed, leaving only the essence of sound, it can be a mp3 file preserved in a small section, then you can also use Mp3Turbo Injector and other auxiliary tools, multiple MP3 files into one MP3 file. Of course, this software can also be used to remove the head or tail of MP3 files or noise part of the mute. The best thing about this software is that it is a green software, no need to install directly, you can use, and software-related options have all been set up parameters, we need changes, will be able to complete the processing of mp3 sound files.

Although the software is called MP3Trim, but it supports a lot of media files, music file formats supported are: MP3, MP2, MPG, MPEG, WAV.

Here we look at how to use MP3Trim to intercept an mp3 file.

Start MP3Trim, the software's main interface shown in Figure 16, first, click on the main interface of the Open menu command to



Figure 16 MP3Trim main interface

Open a need to intercept the mp3 files in the pop-up "open an mp3 file" dialog box, select a mp3 file (Figure 17) and then open the sound file you want to cut. Open the sound file in the process, there will be a process indicator shows when



Figure 17 Open File dialog box

Open the file before the process shown in Figure 18 in the top of the main interface of the blue progress bar. Open the sound file, in the main interface



Figure 18 Open the file information




[Next]



The "information" column shows the mp3 file information, including a test sound file formats, sound quality, play time, whether there is CRC error, etc., in the following "Volume control" can also adjust the volume, decreased left volume; to the right increases the volume.

Then, in the "How much do you want to trim" to set the sound file to be cut beginning and end position (ie setting cutting position to play from what time what time the location of the end). From the beginning to: Start cutting the time, From the end is: the end of the cutting time (as shown in Figure 19, the figure for example, set the start time of 10 seconds to play sound files when cutting started to play 30 seconds when the end of the cutting, please according to their actual



Figure 19 to set processing parameters

Case settings). The cutting sound files at the right time, we do not know how many points, the number of seconds to start cutting, here to tell you a little skill, first to cut the sound file with Winamp player, because when Winamp is playing, will show has been playing out of time, when the position you want to cut when shown on a note of the time, when the cut end of the position you want, please note shows you the time, and is hosted in MP3Trim will cut the time of the beginning and end time on it, if you want to look at your note of the beginning of the end time is accurate, then the operation can be carried out in accordance with the following test: From the beginning in setting a good time to start cutting, click behind the play button to listen to start cutting can preview the sound file location is accurate. From the end end of the cutting time can be the same operation. If it is not very accurate, then it can slightly increase the first time or back a few seconds, so that almost reached your request. When confirmed the beginning and end position accuracy can start cutting the time.

As the front of the cutting operation has been setting the start, end time, and now simply click on the main interface to the top of the Save As menu command to cut out a document saved as other files on the line. (Figure 20)



Figure 20 Save File dialog box

Use this MP3 cutting technology, it can be other sound files to do the same, as long as the software can support voice format able to complete cutting. If you want to cut out the sound files together into a sound file, please look for supporting the use of relevant software and MP3Trim (such as: Mp3Turbo Injector).

Companion of 5: MP3Splitter

MP3Splitter is a compact and convenient tool to split MP3 interception, you can use it freely interception, cutting MP3 files, the file size can be cut file (size) or MP3 songs length of time (time) as the basis for a fixed length can be split into multiple small files such as MP3, (program provides combined functions), suitable for use floppy disk backup; interception paragraphs are you sure you want to intercept the MP3 of the start and end time, enter the effective time, the only interception of the designated time songs paragraphs, and the interception of speed is very fast. There are three main ways of cutting: were split by size, split by time and the selection 3 types of cutting the first two methods are to a song the way a fixed length of continuous decile cut (it will be more than one MP3 cutting paper), while the first three kinds of cutting decision by the user to "grab" the MP3 song length, and only this section of the song "take out" the cutting mode (only get a cut MP3 files).

Here we open a specific instance by to see how to use MP3Splitter to cut mp3 files.

Start MP3Splitter, the software's main interface as shown in Figure 21:



Figure 21 MP3Splitter main interface




[Next]



Software in general, divided into four sections, the top "source file" section is used to set the mp3 files to be intercepted, "output file" section to get the mp3 file interception set the output path, then the following is the interception approach set, we can see split by size, split by time and the selection method that three kinds of interception, the bottom is a row of buttons, option button is used to set up some additional information, such as you can set the input file and output files missing Province paths, Figure 22



Figure 22 Parameters dialog box

We first point "source file" part of the open button from the pop-up "Open" dialog box, select the mp3 files to be intercepted (Fig. 23), then the main interface of the "source file" section will show some of the mp3 file Related information



Figure 23 Open File dialog box

Such as file size and sound the length of time (Figure 24), open the mp3 file, you can play button to play point



Figure 23 Open the file information

This sound file, then the "output file" section set up the output path to save the file and then select one of three interception methods, here we choose the last one kind of "selection", that is, the scope of his interception set up, and finally only the output of a mp3 file (Figure 25)



Figure 25 to set output file path

After the above settings, you can point "create" button to interception, and the software will automatically generate the conditions consistent with the interception of mp3 files and get the mp3 file will intercept the information displayed in the "output file" section (Figure 26)



Figure 26 Setting the scope of interception






Recommended links:



Traditional TV will not "give way" on the computer?



51.com rap Tencent TENCENT responded incredible pressure



dllregisterserver in wuaueng dll failed FIXING



VOB to MP4



Ruiz: Barcelona will help AMD out of the doldrums



Strategy And War Games Infomation



3DS Max 7 Mental Ray renderer whole strategy: global illumination



Believe it or not! Memory buy three strategies buttoned



Shop CLIPBOARD Tools



Make operator = returns a reference point to * this



MMOG / LE assessment of the road Troika



Review Personal Finance



ASF converter



MKV to iPod



7 completely remove the USB device hardware approach



No comments:

Post a Comment